Steelcraft AX633-TS Series Скачать руководство пользователя страница 37

Страница: 37 / 44

INFANT CARRIER

INFANT CARRIER WARNINGS & IMPORTANT NOTES (Infant Carrier

sold separately)

WARNINGS:

• IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH

THIS STROLLER.

• DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED

FOR USE WITH THIS STROLLER BY BRITAX.

• THE MAXIMUM WEIGHT OF THE CHILD USING THE SAFE N SOUND

UNITY INFANT CARRIER IS NOT TO EXCEED 12kg.

•

THE SAFE N SOUND UNITY INFANT CARRIER IS THE ONLY COMPATIBLE

INFANT CARRIER DESIGNED TO FIT THIS STROLLER.

• THE INFANT CARRIER MUST BE CORRECTLY FITTED AND LOCKED ONTO

THE STROLLER.

• WHEN LOCKED ONTO THE STROLLER FRAME, THE INFANT CARRIER

MUST ONLY BE USED IN THE REARWARD FACING POSITION (FACING THE

MOTHER), FITTED FACING TOWARD THE STROLLER HANDLE.

• SECURE THE CHILD USING THE INFANT CARRIER HARNESS AT ALL

TIMES

• DO NOT LEAVE CHILD IN THE INFANT CARRIER FOR EXTENDED

PERIODS.

• THE INFANT CARRIER IS DESIGNED TO PROVIDE MOBILITY OUTSIDE OF

THE CAR BUT IT SHOULD NOT BE USED INSTEAD OF AN APPROPRIATE

COT.

• THE INFANT CARRIER MUST BE REMOVED FROM THE FRAME BEFORE

BEFORE FOLDING.

• THE SUN IS VERY STRONG. DO NOT LEAVE YOUR CHILD EXPOSED TO

THE SUN. THE CANOPY OR HOOD ON THIS PRODUCT WILL NOT GIVE

YOUR CHILD TOTAL PROTECTION FROM THE HARMFUL RAYS OF THE

SUN.

IMPORTANT NOTES:

Содержание AX633-TS Series













































Результаты поиска

Содержание AX633-TS Series

Отзывы:

Похожие инструкции для AX633-TS Series

Бренды по названию

Популярные бренды

Steelcraft AX633-TS Series, Руководство пользователя

Результаты поиска

Содержание AX633-TS Series

Отзывы:

Похожие инструкции для AX633-TS Series

Бренды по названию

Популярные бренды