Steelcase west elm Nimbus, Инструкции по обслуживанию клиентов

Страница: 2 / 5

®
Page 2 of 5
144661
Rev B
1.
2.
3.
Bring arm into position from the bottom side of the chair frame.
Click both back tabs into seat back.
Align arm with holes, arm will have tension when holes are aligned – this
is intended. Beginning with the inside bolt, install four (4) Hex head bolts
(14mm length) and flat washer to 48 in-lbs (5.5 Nm).
1
3
2
Start with whese two bolts
Click!
Click!