Page 7 of 13
939502344 Rev D
®
INSTALLING THE ACOUSTIC ENHANCEMENT SEAL
Treated
Untreated
Portrait
Orientation
Landscape
3 Segments
ACOUSTIC SEAL
(FEFRCGSA)
INDEXING TRIM
SLIT LINE
NOTE: The acoustic seal can be applied
to the glass frames before or after the
glass frames are installed.
INSTALLATION OF SEALS BEFORE
GLASS FRAMES ARE INSTALLED
1.
Locate seal and cut to length so seal runs
full length of frame without overhanging. The
seal is ordered in 2, 4, 6, 8 or 10 foot lengths
to correspond to the glass unit size.
2.
Apply seal to glass frame by applying
pressure to the seal, as shown, while removing
the tape backer.
3.
Remove indexing trim by slitting along the
indexing trim slit line.
3
2
INDEXING TRIM
NOTE: Be careful not to damage or deform
the acoustic seals during handling and
installing of the glass units.
ACOUSTIC SEALS INTERFACE WITH
CEILING TRACK & BASE TRIM
