Steelcase RoomWizard II, Руководство по установке

Страница: 9 / 20

7
INSTALLATION MANUAL |
RoomWizard
DRYWALL MOUNTING STEPS
1 Drill a hole 1 inch (25mm) in diameter 52 inches (132cm) above the
floor.
52" (132cm)
to floor
1"
2 Route the PoE network cable through the wall to the hole.
3 Center and level the mounting puck over the hole using the level.
4 Mark the locations of the four wall anchors using the mounting puck
as a template.
5 Remove the mounting puck and pre-drill four holes at the marked
locations using a ¼-inch (6mm) drill bit.