Assembly Directions
93-9500856 REV
A
Page
12 of 14
1.
Field Installation Package Directions
The following directions are provided to aid you when installing the power supply
field assembly package into the base of a Steelcase power panel.
Remove base covers by pulling outward at the bottom
extreme ends (in area of glides) and lifting straight up.
Retain one base cover as this may be required to
complete the installation depending upon the type of
outlet box assembly being used.
2.
Check panel bottom frame for 3/8” dia. holes. If the
frame does not include these holes, remove (2) bolts
and frame from panel. Drill (2) 3/8” dia. holes (1)
each end.
BASE END CAP
BASE COVER
PANEL BOTTOM FRAME
3/8” DIA. HOLES
3/8” DIA. HOLE
PANEL BOTTOM FRAME
11/16”
5-5/8”
