Assembly Directions
93-9500856 REV
A
Page
11 of 14
1.
Optional Method For Connecting Powered Panels To Building Supply
The power supply box is for installations which may require an attachment other than the method recommended on
page 9 of these directions. CAUTION: Do not make or break electrical connections under load.
Remove and retain (2) screws. Attach connecting
hardware to power supply box cover. Connect wiring
and replace cover to power box. Secure with same
screws just removed.
2.
Position and secure power box to panel assembly with
(2) 1/4-20 screws. Insert cable head into module of
outlet box. Be sure cable head is inserted until
grippers securely engage lip of module. Cable head
should snap in place when correctly inserted.
NOTE: It may be necessary to adjust conduit hardware on
power box to allow retainer screw to point downward for
clearance to panel frame.
3.
The power supply box is provided with knock-out holes
for various conditions. If the side knock-outs are used,
it will be necessary to modify the panel base cover to clear
fittings and conduit.
SCREW
TWIST
CONNECTORS
POWER SUPPLY BOX
CONNECTING
HARDWARE
SCREW 1/4-20
POWER SUPPLY BOX
RETAINER SCREW
CABLE HEAD
GRIPPER
OUTLET BOX
CONDUIT FITTINGS
CONDUIT
MODIFIED BASE COVER
