background image

Customer Service for Drainage Bag, IV Pole & Push Bar

on Mitra

®

 & Mineral

 Recliner

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, 
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com

©

 

2014 Steelcase Inc. 

Grand Rapids, MI 49501 
U.S.A.  
Printed in U.S.A.

®

Page 1 of 4

939502116 Rev C

HEX DRIVE

PHILLI PS DRIVE

Содержание Mineral

Страница 1: ...Steelcase Line 1 at 888 STEELCASE 888 783 3522 for immediate action by people who want to help you Outside the U S A Canada Mexico Puerto Rico and the U S Virgin Islands call 1 616 247 2500 Or visit our website www steelcase com 2014 Steelcase Inc Grand Rapids MI 49501 U S A Printed in U S A Page 1 of 4 939502116 Rev C HEX DRIVE PHILLI PS DRIVE ...

Страница 2: ... of the verified hole location to cut through the fabric down to the wood DO NOT DAMAGE WOOD Remove the cut piece of fabric 4 Install drainage bag bracket with two 2 flat head screws provided with phillips screwdriver OR MITRA ONLY 2 There are no inserts behind the fabric Push and rotate the hole punch tool in the center same as step 3 above and remove the cut piece of fabric This is done so the i...

Страница 3: ...the center of the verified hole location to cut through the fabric down to the steel Remove the cut piece of fabric 4 Install IV pole bracket with two 2 pan head screws provided with hex allen wrench MITRA ONLY 2 There are no inserts behind the fabric Push and rotate the hole punch tool in the center same as step 3 above and remove the cut piece of fabric This is done so the installer will not str...

Страница 4: ... 2 marks made in step 1 3 Now that you know where the center of the threaded inserts are push and rotate the hole punch tool in the center of the verified hole location to cut through the fabric down to the steel Remove the cut piece of fabric 4 Install the screws lock washers collars washers with an allen wrench as shown 5 Place the push bar over the collar washer assembly and install the set scr...

Отзывы: