1.
Acoustical Panels Installed On The Side Of
Series 9000
®
End Panels And Spanner Panels
Center punch (4) locations onto end panel or spanner
panel (R.H. shown typical) Drill 7/64” Dia. pilot holes.
2.
Position and secure (2) top brackets with (1) screw.
3.
Position and secure (2) bottom brackets with (1) screw.
4.
Place acoustical frame return flange onto (2) top
brackets. Push bottom of acoustical panel in until
the bottom brackets snap into place.
NOTE: to
remove the acoustical panels, lift up and tilt from
side to side.
5-1/2”
5/8”
10”
3/4”
5/8”
5-1/2”
TOP
BRACKET
TOP
BRACKET
SCREW
NO. 6 TEK
SCREW
NO. 6 TEK
BOTTOM
BRACKET
TOP
BRACKET
ACOUSTICAL
FRAME RETURN
FLANGE
Assembly Directions
93-9501116 REV A
Page
3 of 4
