Operation and settings
FrameOne Plus Manual -en- 2017
Page 16 of 29
Operation and settings
Safety instructions
The desk
FrameOne Plus
may be used and operated only in perfect technical condition and in compliance
with the user manual.
Before you change the desk height, make sure of the following:
The desktop must be horizontal. In case of uneven floors, you can adjust the height using the adjusting
screws on the feet.
Nobody should be on the desktop.
The maximum permissible carrying capacity of the desk must not be exceeded.
DANGER
Danger from electrical voltage!
Metal parts of the desk may be under electrical voltage in case of damage to
live cables and connections.
Do not earth electrical devices on the desk frame!
WARNING
Danger of injury and damage!
When lifting on the desktop or attached components, the fastening screws
may tear.
Transport or move the desk only by grabbing the base frame.
WARNING
Danger of injury!
Climbing on the desk leads to risk of falling.
Do not use the desk as climbing aid.
Ensure that the connecting cables of devices on the desk are long enough.
Optimum desk height
FrameOne Plus Type 10 Standard, Type 10 EcoPack and Type 16
: Setting the optimum desk height (seat
height) is crucial for the correct sitting position at the workplace. The desk height to be set for the workplace
can be taken from the workplace analysis (for example, according to the German Occupational Safety and
Health Act, the German VDU Ordinance, accident prevention regulations). See also BGI 650: Screen and
office workstations. Design guidelines.
