background image

WARNING

Crush Hazard – Keep Clear

RISK OF SERIOUS INJURY OR DEATH

Raising or lowering desk can trap or crush body parts.

DO NOT OPERATE THIS EQUIPMENT UNLESS PROPERLY 
TRAINED.

 

Read this guide first.

DO NOT ALLOW USE BY CHILDREN

 or people unable to 

understand the risks and to safely adjust desk height.

MAINTAIN >1” (25 mm) GAP ABOVE OBJECTS ON DESK 
AT MAX HEIGHT, AND BETWEEN DESK AND ADJACENT 
OBJECTS.

 Locate desk, accessories and nearby objects to allow 

movement of desktop through full range without pulling cords, 
trapping body parts or colliding with anything (shelves, electrical 
plugs and cords, door knobs, window sills, storage cabinets, etc.). 

DO NOT PLACE FEET OR OTHER BODY PARTS ON CABINETS 
OR OBJECTS BELOW DESKTOP.

This powered, adjustable height desk appliance is not intended for 
use by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of 
the appliance by a person responsible for their safety. 

Children should be supervised to ensure that they do not play with 
appliance.

Содержание Flex Height-Adjustable Desk











Отзывы: