143640
Rev. A
F l e x
4. Operation
The product
Stand
may be used and operated only in perfect technical condition and in compliance with these operating instructions.
Before putting desk utensils or other items on the standing desk, ensure the following:
- Do not exceed the maximum permissible load of the product
The freestanding screen and / or whiteboard can be installed and removed.
Do not overload the hooks on the standing desk excessively.
Please note:
Larger objects must not be hooked in as the shift of the centre of gravity may lead to the standing desk falling over.
5. Transport and assembly
Check the delivery contents:
After unpacking, check the product immediately for transport damage and completeness; if applicable, inform the manufacturer as soon as
possible of any damage.
6. Maintenance and disposal
Function check:
Interval
Inspection point
Function check
Required condition
Action
(if necessary)
Regularly
Fastening elements of Flex Stand
Fastening
All screws and other
fastening elements are
tightened / fixed
Retighten screws / fix
fastening elements
-||-
Fastening elements of the
markerboard and freestanding screen
Position and attachment
Markerboard or
freestanding screen is
properly attached to Flex
Stand
Re-position and fix
markerboard or
freestanding screen
-||-
End caps on the hooks
Fixation
End caps are attached to
the hooks
Hooks without end caps can
be replaced by Steelcase
Service
Cleaning:
Clean the product regularly with a slightly moist cloth and a mild detergent.
Tip: Lime-deficient water reduces streaks and lime stripes.
Special instructions for linoleum surfaces
Use only neutral cleaners for linoleum surfaces.
■
Especially in the post-oxidation phase, linoleum becomes "yellowish", the drying room yellowing. Yellowing is particularly noticeable in bright
colours but disappears completely and the linoleum regains its original colour when exposed to UV light. Yellowing occurs again when the
surface is covered for a long time with, for example, monitors, mousepads, etc. but disappears as described above as soon as the surface is
exposed to the daylight again.
■
Flowerpots and other pots made of terracotta or clay may leave stains on linoleum; please use suitable coasters.
■
Hand and device disinfectants may cause stains due to their high solvent content.
■
Colouring foods may leave stains that cannot be removed after a prolonged exposure time. Please clean surfaces immediately after soiling.
■
Please do not place wet newspapers on the desk as the ink may dissolve due to moisture.
■
Linoleum only withstands heat up to 70 °C.
EN
