Page 4 of 6
939500297 Rev D
4.
Lower the second E (end panel) onto the back panel, middle fixed shelf
and lower fixed shelf as shown. Start at the top of the unit and work
towards the bottom, aligning each pin and dowel. This may
require a rubber mallet to fully seat all of the pins.
5.
Align five (5) black plastic brackets with
the lower fixed shelf and the end panel or
the kick plate as shown. Attach each
bracket with four (4) #8-18 x 5/8"
ph tapping screws.
E
B
E
4
TURN
CLOCKWISE
Fasten Cam Locks in 4 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
Fasten Cam Locks in 4 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
Fasten Cam Locks in 4 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
M
C
L
C
®
5
BLACK
PLASTIC
BRACKET
#8-18 X 5/8"
PH TAPPING
SCREW
L
C
