Page 3 of 6
939500297 Rev D
3
LO
E
B
E
B
Fasten Cam Locks in 4 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
Fasten Cam Locks in 4 places
(The cam lock screw needs to be turned
3/4 full turn or 270
o
clockwise for
complete engagement.)
TURN
CLOCKWISE
1
2a
2b
L
C
NOTE: Assemble as close to assembled units final desired location
to avoid moving a heavy unit.
1.
Lower the B (back panel) onto E (end panel) as shown. Make sure pins
engage into cams (see page 2 for alignment of parts).
2.
Lower LC (lower fixed shelf) (2a) and MC (middle fixed shelf)
(2b) onto the end panel and against the back panel. (Rock back
panel slightly for installation) Make sure pins engage
into cams. Tighten cams located on end panel.
3.
Lower LO (kick plate) onto the end
panel and against the lower fixed shelf.
Make sure pins engage into cams.
M
C
L
C
®
