Steelcase Cobi 434 Скачать руководство пользователя страница 7

Страница: 7 / 7

Page 7 of 7

939543407 Rev B

Slide seat assembly as shown using inner legs to push seat

cushion inward.

Place chair onto the floor as shown.

Pull back outer seat shell.

While pulling back on outer seat shell, install M6 x 45mm wafer

head screw and tighten to 15-30 in-lbs. DO NOT over tighten.
IMPORTANT: Make sure to install this screw.

OUTER SEAT SHELL

Содержание Cobi 434

Страница 2: ...7 939543407 Rev B 2 3 OUTER SEAT SHELL 1 Place the chair onto the floor as shown 2 Squeeze the outer seat shell to expose the seat screw 3 While squeezing the outer seat shell remove the screw with a T 30 torx bit ...

Страница 4: ...8 9 Page 4 of 7 939543407 Rev B 8 Remove ten 10 8 18 x 1 2 pan head tapping screws from the seat shell 9 Remove seat shell ...

Страница 5: ...ecure replacement seat shell to underside of seat assembly using ten 10 8 18 x 1 2 pan head tapping screws to a torque of 7 10 in lbs NOTE Be sure to hand tighten these screws with a T 20 torx head screwdriver to avoid over tightening and possible damage NOTE Make sure the pneumatic handle goes through the hole in the seat shell ...

Страница 7: ... push seat cushion inward 7 Place chair onto the floor as shown 8 Pull back outer seat shell 9 While pulling back on outer seat shell install M6 x 45mm wafer head screw and tighten to 15 30 in lbs DO NOT over tighten IMPORTANT Make sure to install this screw 7 9 8 OUTER SEAT SHELL ...