Page 6 of 8
939503022 Rev D
Mark and drill here
SMCL-2
Clip used on all 3200 tables 2-
1/2" aprons
Package Contains:
1 - Service Module
2 - SMCL- 2 Clips
6 - Screws, #8-1/2 Pan Hd
SMCL-3
Clip used to attach any service
module to 2300, 3200 and
5200-24” deep series credenza
tops, 2900 tables and 800
lateral file tops. Drilling
required.
Package Contains:
1 - Service Module
2 - SMCL- 3 Clips
4 - Screws, #8-1/2 Pan Hd
4 - Screws, #6-3/4 Rh Ph
SMCL-8
Clip used to attach any service
module to Avenir series desks,
and credenza tops, W/ 1 1/2”
thick tops. Drilling required.
1 - Service Module
2 - SMCL-8 Clips
4 - Screws, #8-1/2 Pan Hd
4 - Screws, #6-3/4 Rh Ph
Mark And Drill Here
Installation of SMCL-2 Clip
1.
Place service module in position on table top.
Align back and sides of service module with back
and sides of table top. Place clip (SMCL-2) under
apron of table and snap into position.
2.
Center Punch and drill 1/8" hole throught slot
in bracket, under apron.
3.
Attach with #8-1/2 Pan Hd screws.
1.
Place service module in position on table top.
Align back and s ides of service module with
back and sides of table top.
2.
Place clip into receptacle inside window of
service module. Using the holes in the clip, mark
the edge of the desk top for drilling.
3.
Remove service module from top of unit,
center punch and drill holes. (No.38 - .101 Dia.)
4.
Attach clip to service module with #8-1/2 Pan
Hd screws and attach clip to edge of desk top
with #6-3/4 Rh Ph screws
Installation of SMCL-3 & SMCL-8 Clip
