Page 6 of 8
939500519 Rev B
®
Mounting On-Module Cantilevers
1.
Insert top hook of cantilever into
vertical slot, swing down into the vertical
position (1a). Tap into position with a
mallet (1b).
NOTE: The tab shown in the
close-up (1c) provides 1/2" spacing on the
panels. Remove this tab when used on
ap40 panels.
2.
Tip mounting plate and insert tab
through the cantilever for left, right or
shared conditions.
3.
Check to make sure the cantilever is
fully engaged at the locations shown as 'a'
and 'b'.
1a
1c
2
3
b
a
1b
TAB
