Page 8 of 19
939548202 Rev D
Removal & Installation of the Lumbar
1a.
Follow steps on page 6 for removal
of the back cushion.
2a.
Remove the lumbar by pulling it out. To install
the lumbar, place one side of the lumbar into position in
the back assembly. Then, flex the lumbar (and the wires of
the lumbar) inward and p
la
ce the other side into position.
3a.
Follow steps on page 7 for installation
of the back cushion.
Removal & Installation of the Back Shell
1b.
Follow steps on page 6 for removal
of the back cushion.
2b.
Refer to Removal & Installation of the Lumbar
above to remove the lumbar.
3b.
Remove seven (7) screws and two (2) clips.
Note: Save the clips for reassembly.
4b.
Remove the back shell. Reverse step for installation
of the back shell.
5b.
Attach seven (7) screws and two (2) clips.
Torque to 25-50 in-lbs.
6b.
Refer to installation of the Lumbar above to
install the lumbar.
7b.
Follow steps on page 7 for installation of the
back cushion.
LUMBAR
2a
4b
BACK SHELL
CLIP
