Page of
939548202 Rev
Removal & Installation of the Lumbar
for Amia Air
1.
Follow steps on page 9 for removal
of the Back Shell.
2.
With Back Shell removed, the Lumbar
Handles can be removed from the Lumbar pad.
Rotate the Handle to 45° (
2
a), then shift the gap
to
one end (
2
b) and rotate Handle to unsnap
from Lumbar Pad (
2
c).
3.
Remove lumbar by sliding it out of the Back Shell
slot
(3a)
. Reverse step for installation of lumbar.
Only
Handle snaps should protrude from
the Back Shell slot (
3
b).
4.
Reverse step
2
to reinstall the Lumbar
Handles.
NOTE: When adding a Lumbar Pad to a chair
that was purchased without one you will need to
remove the Lumbar Filler pieces. (4)
To remove, pull out by hand or use a
flat blade screw driver to pop-out.
2x
2x
2
a
2
c
2
b
3
a
4
5.
Follow steps on page 9 for installation
of the Back Shell.
3
b
