Operation and settings
BA_Activa Lift 2 Elektro ©_D_10_2010
17
www.steelcase-village.de
6 Operation and settings
6.1 Safety
The Activa Lift 2 desk should only be used and operated in faultless condition and in compliance
with the instructions in the user manual.
Prerequisites for adjusting the height of the desk:
• Persons or objects should not be in the entire lift range e.g. open doors or windows, nor should
objects protrude into the lift range.
• There should be no objects in the lift range of the lift column.
• No one should be on the desk.
• The maximum permissible load capacity of the desk should not be exceeded (see sticker) (See
3.1 Technical data on page 7).
• There should be no heavy loads on the desktop (e.g. devices or large amounts of paper). Heavy
loads make the height adjustment more difficult.
• The desktop must be horizontal. If the floor is uneven, align the desktop via the adjustment
screws on the feet (See 5.4 Height compensation on page 15).
6.2 Safety instructions
Electrical
energy
DANGER
Contact with electrical voltage may cause serious injury and death by electrocution!
Only remove or insert plug connections when the desk is de-energised
Do not attempt to open the housing of the following components:
•
Controller
•
Electric motor
•
Columns
•
Operator panel
DANGER
Contact with electrical voltage may cause serious injury and death!
The metal parts of the desk may become energised if live cables and connections
are damaged.
Do not earth electrical devices on the desk frame!
