Page 2 of 5
939501228 Rev C
7/8"
27"
Bases
TIE ROD
TIE ROD
BASE MOUNT
JAM NUT
38"
Bases
Jam Nut
Table Base Assembly
1.
Remove table from carton and invert onto a
protective surface to avoid marring or scratching
the top.
2.
Locate Top Mounting Bracket with pilot holes
in top and secure with (8) screws as shown.
3.
38 INCH BASE-
-turn jam nut onto tie rod threads as far as possible.
27 INCH BASE
-turn jam nut onto tie rod threads leaving 7/8 inch
of exposed threads.
4.
Screw tie rod end, with jam nut, into base
mount until the jam nut snugs up to the mount.
Tighten jam nut against the mount to position
tie rod. Be sure the jam nut is securely tightened
for proper assembly.
TOP MOUNTING BRACKET
PILOT HOLES
