Assembly Directions
93-9500971 REV A
Page
2 of 5
Package Contents
1
Top
1
Back panel
1
End panel & leg assembly
2
Bottom panel plates
5
1/4 x 1 hex head screws
5
#10 x 1/2 sheetmetal screws
1
32-42-DH-DA clamp
4
#10-24 x 3/8 machine screws
2
#10 x 1/2 hex head screws
4
#10-24 hex nuts
2
1/4-20 x 1-1/8 machine screws (not required for wood)
2
Clip angle (not required for wood)
2
Channel spacers (used on 4200 only)
Qty.
Description
Notes
The following assembly steps apply to either a right hand or left hand 42-DH-DA or 32-DH-DA unit. A left hand
unit is shown for all instructions.
a.
A steel top has been shown. When assembling a wood top , the same instructions apply.
b.
If the unit is assembled on a non-carpeted floor, we recommend you
cushion the top with cardboard.
c.
If your unit has been pre-assembled, begin with step 4.
d.
1.
Assembling return unit end panel to top
Place end panel over pre-drilled holes in end of top
and install (2) 1/4 x 1 hex head screws.
NOTE: Use
(2) channel spacers when attaching an end panel to a
4200 top.
1/4 x 1 HEX
HEAD SCREW
CHANNEL SPACERS (2)
4200 ONLY
TOP
