SteelBeast BM-18 Скачать руководство пользователя страница 6

Страница: 6 / 28

BM-18

This document is protected by copyrights.

Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions Ltd is prohibited.

2. SAFETY PRECAUTIONS

1. Before use

, read this Operator’s Manual and complete a training in occupational

safety and health.

2. Use

only in applications specified in this Operator’s Manual.

3. Make sure that the machine has all parts and they are genuine and not damaged.

4. Make sure that the specifications of the power source are the same as those

specified on the rating plate.

5. Do not carry the machine by the cord and do not pull the cord. This can cause

damage and electric shock.

6. Keep untrained bystanders away from the machine.

7. Before each use, ensure the correct condition of the machine, power source,

power cord, plug, control parts, and tools.

8. Before each use, make sure that no part is cracked or loose. Make sure to main-

tain correct conditions that can have an effect on the operation of the machine.

9. Keep the machine dry. Do not expose the machine to rain, snow, or frost.

10. Keep the work area well-lit, clean, and free of obstacles.

11. Do not use near flammable materials, or in explosive environments.

12. Use only tools specified in this

Operator’s Manual.

13. Do not use tools that are dull or damaged.

14. Make sure that the cutting inserts and the milling head are correctly attached.

Remove wrenches from the work area before you connect the machine to the

power source.

15. Do not use the machine so that the milling head points up.

16. If the cutting edge of an insert is worn, turn all inserts by 90° or 180°. If all the

cutting edges are worn, install new inserts specified in th

is Operator’s Manual.

17. Use eye and ear protection, non-skid footwear, and protective clothing. Do not

use loose clothing.

18. Do not touch chips or moving parts. Do not let anything catch in moving parts.

19. After each use, clean the machine and the milling head with a dry cotton cloth

and no chemical agents. Do not remove chips with bare hands.

20. Maintain the machine and install/remove parts and tools only after you unplug the

machine from the power source.

21. Repair only in a service centre appointed by the seller.

Содержание BM-18





























Результаты поиска

Содержание BM-18

Отзывы:

Похожие инструкции для BM-18

Бренды по названию

Популярные бренды

SteelBeast BM-18, Руководство оператора

Результаты поиска

Содержание BM-18

Отзывы:

Похожие инструкции для BM-18

Бренды по названию

Популярные бренды