BM-18
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions Ltd is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The BM-18 is a bevelling machine designed to bevel plates and pipes made of steel,
aluminium alloys, brass, or plastics.
Depending on the milling head, the machine allows you to bevel at the angle of
22.5°, 30°, 37.5°, 45°, 50°, 55°, or 60°. The minimum workpiece thickness is 2 mm
(0.08
″). The maximum bevel width is 18 mm (0.71″). A radius milling head allows you
to bevel with a radius of 2, 3, 4, or 5 mm. The minimum diameter of a hole to be
machined is 40
mm (1.57″).
An optional attachment allows you to bevel pipes and a sticker protects aluminum
workpieces from scratches. A worktable fixture allows you to bevel flat bars.
1.2. Technical data
Voltage
1~ 220
–240 V, 50–60 Hz
1~ 110
–120 V, 50–60 Hz
Power
2200 W
Rotational speed with no load
1800
–5850 rpm
Protection level
IP 20
Protection class
II
Maximum bevel width (
b
)
18 mm (0.71
″, Fig. 1)
Bevel angle (
ß
, depends on the milling head)
22.5°, 30°, 37.5°, 45°, 50°, 55°, 60 (Fig. 1)
Minimum workpiece thickness (bevelling)
2 mm (0.08″)
Minimum workpiece thickness (radius bevelling)
7 mm (0.28″)
Minimum hole diameter
40 mm (1.57
″)
Edge radius
2 mm, 3 mm, 4 mm, 5 mm (Fig. 1)
Noise level
More than 70 dB
Vibration level
2.3 m/s
2
(7.5 ft/s
2
)
Machine harmful for health.
Take periodic breaks during work.
Required ambient temperature
0
–40°C (32–104°F)
Weight (without milling head)
10 kg (22 lbs)
Fig. 1.
Bevel dimensions
