2
1-800-348-5004
SPECIFICATIONS
ASSEMBLY
ATTACH EYESHIELD
ATTACH WORK RESTS
1. Attach Spark Guard (16) above Grinding Wheel using two Screw, Spring Washer and
Flat Washer Assemblies (1). Do not tighten Screws.
2. Adjust Spark Guard to within 1/16″ of the Wheel. Spin Wheel to confirm Spark Guard
3. Attach Eyeshield (18) to Spark Guard using Bolt (14), Flat Washer (15), and
Lock Nut (19). Tighten hardware until Eyeshield stays in place, but can still be
adjusted.
1. Attach Spark Guard (16) above Grinding Wheel using two Screw, Spring Washer and
Flat Washer Assemblies (1). Do not tighten Screws.
2. Adjust Spark Guard to within 1/16″ of the Wheel. Spin Wheel to confirm Spark Guard
3. Attach Eyeshield (18) to Spark Guard using Bolt (14), Flat Washer (15), and
Lock Nut (19). Tighten hardware until Eyeshield stays in place, but can still be
adjusted.
1. Attach Left Work Rest (16) using Washer (41)
and Wing Bolt (16). Do not tighten Wing Bolt.
2. Repeat for Right Work Rest (17).
3. Adjust Work Rests to within 1/16″ of each
Wheel. Spin each Wheel to confirm Work
Rest does not touch Wheel, then tighten
Wing Bolts.
Electrical Rating
120VAC / 60Hz / 0.4A
Motor No Load Speed
3,600 RPM
Arbor Size
1/2"
Mounting holes
3/16"
226002
Screw,
Spring Washer,
and Flat Washer
Assembly (1)
Grinding
Wheel
Spark
Guard
(16)
Spark
Guard
Bolt
(14)
Lock Nut
(19)
Flat Washer
(15)
Eyeshield
(18)
Left Work
Rest
(16)
Washer
(41)
Wing
Bolt
(16)
Buffing
Wheel
