Steel City TITANIUM 50-550, Руководство пользователя

Страница: 9 / 40

Page 9
UNPACKING AND INVENTORY
ITEM QTY DESCRIPTION
1 2 SANDING BELT 1 X #100 AND 1 X #180
2 1 GRAPHITE PAD
3 1 FELT PAD
4 1 PLATEN REMOVAL TOOL
5 1 FLAT SCREWDRIVER
6 1 PHILLIPS SCREWDRIVER
7 1 WRENCH 17 X 19
8 1 WRENCH 12 X 14
9 1 WRENCH 8 X 10
10 1 HEX KEY SET
11 2 DOOR LOCK KEY
12 2 LIMIT SWITCH TUBE
13 1 TOOLBOX
◊ CLEANING
Anti-corrosive oil is applied to the machine before
shipment. After unpacking, clean the anti-corrosive oil
with soft cloths and appropriate cleaning product. Do
not use lacquer thinner, acetone or other volatile
solvents, as they can damage painted surfaces.
Be aware of missing or damaged parts to
inform your supplier as soon as possible.
◊ MOVING THE MACHINE
The machine is heavy and should be moved to its
location with a lift truck. Make sure the lift truck has
adequate capacity and proper handling methods are
used. The forks must protrude from the far side of the
machine bottom when moving. Pay careful attention to
the machine balance while it is being moved and that
it does not hit the floor when placed at the location.
This machine is heavy and
should be moved to its
location with a lift truck.
WARNING
!