Steel City 40300H, Руководство пользователя

Страница: 21 / 34

21
2. Crank the raising / lowering handle until the button
(B) comes in contact with the workpiece.
3. As you rotate the raising / lowering handle, the
needle on the depth of cut scale will move showing
you how much material will be removed in that
pass.
QUICK SET THICKNESS INDICATOR
The Quick Set Thickness Indicator(A) provides a simple
way to set the finished thickness of a workpiece. The
scale comes in settings of 1/8”, 1/4”, 1/2”, 3/4”. Rotate
the wheel of the indicator to the desired finished thick-
-ness. Use this feature when thickness planing multiple
workpieces to ensure a uniform thickness of all work-
-pieces.
SEE FIG 11.
Fig. 11
A
GETTING PREPARED
It is always a good idea to use a piece of scrap wood
for your first planing attempt. Also, before each use of
the planer, make it a habit of checking for loose fasten-
ers, fittings or hardware. Turn the planer ON and allow
it to reach full speed. Pay close attention to any exces-
sively loud noises that may be coming from the planer
or any excessive vibration. If either occurs, shut down
the planer immediately checking again for loose hard-
ware. Go through the ASSEMBLY and ADJUSTMENTS
sections again if necessary.
All manuals and user guides at all-guides.com
all-guides.com