Steel City 40300H, Руководство пользователя

Страница: 20 / 34

20
OPERATIONS
NOTICE: This operations section was designed to give
instructions on the basic operations of this planer.
However, it is in no way comprehensive of every planer
operation. It is strongly recommended that you read
books, trade magazines, or get formal training to maxi-
mize the potential of your planer while minimizing the
risks.
ALWAYS wear eye protection. Any machine can
throw debris into the eyes during operations, which
could cause severe and permanent eye damage.
Everyday eyeglasses are
NOT safety glasses.
ALWAYS wear Safety Goggles (that comply with
ANSI standard Z87.1) when operating power tools.
ALWAYS wear a NIOSH/OSHA approved dust mask
to prevent inhaling dangerous dust or airborne
particles.
WARNING
!
WARNING
!
WARNING
!
This planer is designed to process wood ONLY.
POWER SWITCH
The planer is turned on by flipping the switch into the
up position and it is turned off by flipping the switch in
the down position. This planer is also equipped with a
special lockout toggle switch that prevents unauthorized
use. To prevent unauthorized use of the planer, simply
pull out the yellow key (A) located on the face of the
switch.
SEE FIG 9.
A
Fig. 9
DEPTH OF CUT SCALE
The Depth Of Cut Scale, located on the front of the
machine, is a convenient way to quickly determine how
much material is being planed off in one pass.
1. With the machine OFF, insert your workpiece just
under the depth of cut scale (A).
SEE FIG 10
Fig. 10
B
A
All manuals and user guides at all-guides.com