Steel City 35964, Руководство пользователя

Страница: 19 / 43

GRANITE EXTENSION WING ASSEMBLY
FOR 35971/35972
CAUTION: The granite extension wing is heavy; two
people are required for assemble.
1.One person put left extension wing on the top of
cabinet. Alignment pin into bottom of wing (A).
SEE FIG.9
1.One person put left extension wing on the top of
cabinet. Alignment pin into bottom of wing (A).
SEE FIG.9
2. Another person locks 4 bolts (A) with flat and spring
washer and from the bottom of cabinet and tighten it.
SEE FIG. 1 0
2. Another person locks 4 bolts (A) with flat and spring
washer and from the bottom of cabinet and tighten it.
SEE FIG. 1 0
F ig .9
F ig .1 0
B
NOTE:
Need not adjust the flatness for
extension wings after assembling.
Because we have done the pre-
adjustment and pre-setting of the
extension wings for the flatness in factory.
Need not adjust the flatness for
extension wings after assembling.
Because we have done the pre-
adjustment and pre-setting of the
extension wings for the flatness in factory.
19
3.The user can fine tune the flatness for the extension
Wings.
4.To loose 4 screws (B) by 6.0mm Allen Wrench;
5.To loose 4 setting screws (C) by 2.5mm Allen wrench.
SEE FIG.11
3.The user can fine tune the flatness for the extension
Wings.
C
F ig .11
6. D
E
Using an open wrench ( ) to adjust the 4 elevation
screws ( ) to raise or lower the extension wing to the
table. SEE FIG.12
F ig .12
D
E
7.Use a straight edge across to the main table and
extension wings, checking the flatness of both main and
extension wings. SEE FIG.13
8.Make sure both wings are aligned, if not, refer to step (6)
until completely adjusted.
9.Using a 6.0mm Allen wrench to secure 4 screws (B).
A
F ig .13
T he a sse m b l y m etho d f or 359 6 3/359 64
Ex tension w ing is the s am e a s 35971/35972