25.
recommended accessories. Use of
incorrect or improper accessories could cause serious
injury to the operator and cause damage to the
machine. If in doubt,
use it.
26. Wear proper clothing,
wear loose clothing,
gloves, neckties, or jewelry. These items can get
caught in the machine during operations and pull the
operator into the moving parts. Users must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
28.
these instructions and refer to them frequently
and use them to instruct other users.
USE ONLY
DO NOT
DO NOT
SAVE
29.Information regarding the safe and proper operation of
this tool is also available from the following sources:
Power Tool Institute
1300 Summer Avenue
Cleveland, OH 44115-2851 www.powertoolinstitute.org
National Safety Council
1121 Spring Lake Drive
Itasca, IL 60143-3201
American National Standards Institute
25West 43rd. St, 4th Floor
New York, NY. 10036
ANSI 01.1 Safety Requirements
For Woodworking Machines
WWW.ANSI.ORG
U.S. Department of Labor Regulations
OSHA 1910.213 Regulations
WWW.OSHA.GOV
PRODUCT SAFETY
1. Serious personal injury may occur if normal safety
precautions are overlooked or ignored. Accidents are
frequently caused by lack of familiarity or failure to
pay attention. Obtain advice from supervisor,
instructor, or another qualified individual who is
familiar with this machine and its operations
2. Every work area is different. Always consider safe-ty
first, as it applies to your work area. Use this
machine with respect and caution. Failure to do so
could result in serious personal injury and damage to
the machine.
3. Prevent electrical shock. Follow all electrical and
safety codes, including the National Electrical
Code(NEC) and the Occupational Safety and Health
Regulations (OSHA). All electrical connections and
Wiring should be made by qualified personnel only.
.
5. STOP using this machine, if at any time you
experience difficulties in performing any operation.
Contact your supervisor, instructor or machine service
Center immediately.
12
6. Safety decals are on this machine to warn and direct
you to how to protect yourself or visitors from
personal injury. These decals
be maintained
so that they are legible.
decals that are
not legible.
7.
leave the unit plugged into the electrical
outlet. Unplug the unit from the outlet when not in use
and before servicing, performing maintenance tasks,
or cleaning.
8.
turn the power switch “OFF” before
Unplugging the table saw.
MUST
REPLACE
DO NOT
ALWAYS
10.
accessories only recommended by Steel City.
11.
pull the table saw by the power cord.
allow the power cord to come in contact with
sharp edges, hot surfaces, oil or grease.
12.
unplug the table saw by pulling on the
power cord.
grasp the plug, not the cord.
13.
a damaged cord immediately.
usea damaged cord or plug. DO NOT USE if the
table saw is not operating properly, or has been
damaged,left outdoors or has been in contact with
Water.
USE
DO NOT
NEVER
DO NOT
ALWAYS
REPLACE
DO NOT
