Steca PF166, Инструкция по установке и эксплуатации

Страница: 10 / 16

10
722.649 | 07.51
ENGLISH
food as quickly as possible for consumption.
11 Features
11.1 Baskets
The baskets make sorting easier. The upper baskets can be hung by the handle
on the cabinet frame. The lower baskets stand on the floor of the device or on
the inwardly pivoted handles of the lower baskets. Press the handle down, then
lift and pivot inwards. Simply grasp the handle from above to remove the lower
baskets.
11.2 Lock
The device has a lock and 2 keys are provided.
11.3 Freezer tray (depending on features)
Depending on the model, the partition wall between the pre-freezing and stor-
age area consists of two freezer trays. When placed above each other they fit
below the hanging basket in the pre-freezing area.
The freezer tray allows you to gently freeze fruit (e.g. berries, fruit pieces), herbs
and vegetables for garnishing. Loosely distribute the cooled / frozen products on
the freezer tray (the fruit do not stick together and largely retain their original
form). Allow to freeze for 10 to 12 hours, then pack into freezer bags or contain-
ers and store in a basket.
You can also use the trays as partition walls. This allows you to create two differ-
ent temperature zones. The freezer trays can also be used to catch condensation
water.
11.4 Cold battery (depending on features)
The cold batteries provided prevent a rapid temperature increase inside the
device in the case of a power outage – the quality of the food is retained for
longer.
To ensure fastest possible freezing of the batteries when power is restored,
these should be placed in direct contact with the internal walls and floor of the
device. Once the batteries are fully frozen, they should be placed in the upper-
most region of the internal storage. Use the freezer tray provided, which can be
positioned in the upper row of baskets together with the battery.
12 StopFrost system
The device has a new StopFrost system. This system significantly reduces the
build up of frost and ice so that defrosting is seldom necessary.
The lid can also be immediately reopened after filling the device with cooled /
frozen products, since the StopFrost system provides immediate pressure com-
pensation once the lid is closed.
Function: A connection is made between the internal and external environments
via a dry cartridge foamed into the device lid.
In normal devices, moist air is sucked in via the lid seals during the cooling
phase, which leads to the formation of frost and ice over time.
This moisture is taken in by the StopFrost system so that only dry air remains in
the inner compartment. During pauses in the cooling process, the dry air flows
outside once more, thus drying the dry cartridge.
13 Defrosting
Over longer operating periods, a layer of frost and / or ice forms on the inner
walls. This increases the energy consumption. Regular defrosting should be done
for this reason.
Switch off the device for defrosting. Remove the fuse and disconnect the bat-
tery or pull the power plug.
Wrap the cooled / frozen goods in paper or blankets and store them in the
baskets in a cool place.
Pull the condensation water plugs from the outflow opening. Remove the
partition wall or freezer tray and place it underneath the device so that the
condensation water flows through the outflow opening and into the partition
wall or freezer tray.
•
•
•