Steca PF166-H, Инструкция по установке и эксплуатации

Страница: 8 / 15

8
760.180 | 17.10
ENGLISH
7.3 Temperature alarm
The temperature alarm helps to protect your cooled / frozen products and also
helps to save energy.
The alarm sounds when the internal space is not cold enough. The temperature
display flashes at the same time, or when too much warm air enters the cabinet
while sorting, placing, or removing food.
Pressing the alarm-off button mutes the alarm. The temperature display contin-
ues to flash until the alarm state is over.
8 Menu functions
The following functions can be set using the menu:
• The display brightness
• Temperature display in degrees Celsius or Fahrenheit
• The use of the device as a refrigerator or freezer
8.1 Setting the brightness
X
Pressing the  button (Menu) for 3 seconds brings you to the menu, the

display (°F symbol) flashes and "b" is displayed.
X
Pressing the

button (Menu) again causes a "1" to appear in the display.
X
The

buttons (Up / Down) allow a brightness value of “1”, “2” or “3” to
be selected. The higher the number, the brighter the display.
X
Once the desired brightness has been set, this has to be confirmed by
pressing the

button (Menu).
Pressing the

button (On / Off) returns you to the standard mode.
NOTE
Energy saving
X
The higher the brightness, the higher the power consumption. The factory set-
ting “b1” is the power-saving mode.
8.2 Setting the display of Celsius / Fahrenheit
X
Pressing the

button (Menu) for 3 seconds brings you to the menu, the

display (°F symbol) flashes and "b" is displayed.
X
Pressing the

button (Up) allows you to change from "b" to “

”.
X
If you now press the

button (Menu) then “°C” appears.
X
The

buttons (Up / Down) can now be used to select between “°C” and
“°F”.
X
Once the desired value has been set, this is confirmed by pressing the

button (Menu).
Pressing the

button (On / Off) returns you to the standard mode.
8.3 Setting refrigerator / freezer mode
X
Pressing the

button (Menu) for 3 seconds brings you to the menu, dis-
play

(°F symbol) flashes.
X
Pressing the

button (Up) causes “

“ to appear.
X
Pressing the

button again causes “F” to appear.
X
Pressing the

button (Menu) again causes “F

“ to display.
X
The

buttons (Up / Down) can now be used to select between refrigerator
“F

“ and freezer “F

“.
X
Once the desired value has been set, this is confirmed by pressing the

button (Menu).
Pressing the

button (On / Off) returns you to the standard mode.
1
2
3
4
1
2
3
4
5
1
Refrigerator Freezer
2
3
4
5
6