manualshive.com logo in svg

Stec mach2, Руководство по эксплуатации продукта, Страница: 31 / 86

Поделиться
Скачать
Stec mach2 Скачать руководство пользователя страница 31

PRELIMINARY/CONFIDENTIAL

MACH2 2.5-Inch Serial ATA Solid State Drive

15

ATA C

OMMANDS

Overview

This section provides information on the ATA commands supported by the SSD. The commands are 
issued to the ATA by loading the required registers in the command block with the supplied 
parameter, and then writing the command code to the register.

ATA Command Flow

DDMAI0: DMA_in State

This state is activated when the device receives a DMA data-in command or the

transmission of one or more data FIS is required to complete the command.

When in this state, the device shall prepare the data for transfer of a data FIS

to the host.

Transition DDMAI0:1

When the device has the data ready to transfer a data FIS, the device shall

transition to the DDMAI1: Send_data state.

Transition DDMAI0:2

When the device has transferred all of the data requested by this command or

has encountered an error that causes the command to abort before completing

the transfer of the requested data, then the device shall transition to the

DDMAI2: Send_status state.

DDMAI1: Send_data

This state is activated when the device has the data ready to transfer a data FIS

to the host. When in this state, the device shall request that the Transport layer

transmit a data FIS containing the data. The device command layer shall

request a Data FIS size of no more than 2,048 Dwords (8KB).

Transition DDMAI1:1

When the data FIS has been transferred, the device shall transition to the

DMAOI0: DMA_in state.

DDMAI2: Send_status

This state is activated when the device has transferred all of the data requested

by the command or has encountered an error that causes the command to

abort before completing the transfer of the requested data. When in this state,

the device shall request that the Transport layer transmit a Register FIS with the

register content as described in the command description in the ATA/ATAPI-6

standard and the I bit set to one.

Transition DDMAI2:1

When the FIS has been transmitted, the device shall transition to the DI0:

Device_idle state.

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Содержание mach2























































































Отзывы:

Нет отзывов