ii
MACH2 2.5-Inch Serial ATA Solid State Drive
Export Administration Regulations
This document may contain technical data controlled by U.S. Export Administration Regulations, and may
be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or
indirectly, in contravention of the U.S. Export Administration Regulation is prohibited.
Trademark Information
The STEC name, logo and design are trademarks of STEC Inc. No right, license, or interest to such
trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by
you with respect to such trademark. Other product and corporate names mentioned in this document are
used for identification purposes only and may be trademarks or registered trademarks of their respective
companies.
Disclaimer of Liability
The performance information and specifications furnished in this document reflect the engineering
development objectives of STEC Inc. and should be used for comparative analysis and reference purposes.
The content of this document is accurate as of the date of this publication; however, the information
contained herein, including but not limited to any instructions, descriptions and product specifications, is
subject to change without prior notice.
STEC INC. (STEC) PROVIDES NO WARRANTY WITH REGARD TO THIS DOCUMENT OR
ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. STEC INC.
ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY
FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMMISSIONS CONTAINED
HEREIN. IN NO EVENT SHALL STEC BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT,
CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS
DOCUMENT OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE
THEREOF.
Copyright Notice
Copyright ©
2007
by
STEC
™, Inc. All rights reserved. This guide is copyrighted by
STEC
, Inc., with all
rights reserved. Information contained in this document, including but not limited to any instructions,
descriptions and product specifications, is company private to STEC and shall not be modified, used,
copied, reproduced or disclosed in whole or in part, in any form or by any means, electronic or mechanical,
for any purpose, without the written consent of STEC Inc.
electronic components distributor