Steba E 90, Инструкция по эксплуатации

Страница: 11 / 24

11
Assembly:
The motor base should be wiped with a damp cloth. All other parts can be rinsed ∙
and dryed.
Attantion: In the sieve are sharp knives!
Take care, that the switch is on position “0” ∙
Place the juice collector onto the motor base, the juice spout should be placed in ∙
the curving of the motor base.
Put the sieve into the juice collector. Then press the sieve without force at the edges
∙
on the motor base until you hear a slight click sound. Take care that the sieve is not
shaky.
Put the lid on the juice collector and close the locks.
∙
Ensure that the locking bow is tightly closed. ∙
Place an pulp connector under the pulp ejection. Hint: For a more easy cleaning of ∙
the pulp container put a small plastic bag inside to collect the pulp.
Place the juice collector under the spout.
∙
Then plug in the appliance.
Usuage:
When the appliance is used for the first time the motor can have a little smell, ∙
which stops fast
Switch position “I”: slow speed- for soft fruits like grapes, melon, etc Switch poition
∙
“II”: high speed- for hard fruits and vegetables like apples, carrots etc
Never place food with a stone or a hard skin into the feeding opening.
∙
Press the pusher slowly, without force down. Never use any other appliances or put ∙
fingers into the feedding opening. Risk of injuries!
After the last filling let the appliance work for some seconds, that the juice can
∙
drop out of the spout.
Do not overfill the pulp container, as this can cause problems during usage or even
∙
damage the appliance.