12 | ENGLISH
CLEANING & STORAGE
1.
Turn Temperature Control Dial to OFF position. To eliminate the
potential for water leakage, move Continuous Steam Switch to OFF
position. Place unit securely on the Base.
2.
Unplug the power cord. Allow unit to cool for at least 30 minutes.
3.
Once cooled, open Water Tank Cap and drain any remaining water
into a sink or tub. Close Cap when finished.
4.
Wipe Main Body and Ironing Plate with a soft cloth lightly moistened
with water.
• DO NOT clean Ironing Plate with detergents or descalers.
• DO NOT clean Ironing Plate with abrasive or corrosive products.
• DO NOT submerge unit or hold unit under running water.
5.
If desired for storage or moving Cordless Iron, place unit on the base
and securely connect the Carry Case to Base. The clips will “click” into
place when securely fastened.
6.
Place unit in cool, dry location.
MINERAL BUILD-UP
1.
Follow
STEPS 1-3
under
CLEANING & STORAGE
section above;
however, leave Water Tank Cap open.
2.
Make a mixture of 0.5 oz. distilled water and 0.5 oz. vinegar.
3.
Using included Measuring Cup, pour water-vinegar solution into
Water Tank. Close Water Tank Cap.
4.
Follow normal steam ironing procedure, as outlined on Page 9-10.
Allow unit to steam out full contents of Water Tank. When finished,
turn Continuous Steam Switch to OFF position and place unit
securely on the Base.
5.
Allow to cool for 5 minutes, then refill Water Tank with fresh distilled
water. Repeat
STEP 4
until vinegar odor dissipates.
6.
Store unit as normal.
Storage & Care
