STEAM MOP SETUP
EXTENSION POLE
1.
Insert threaded connector on bottom of Extension Pole into pole base on main unit
(FIGURE 1-A).
2.
Rotate Extension Pole in a clockwise direction as shown to screw it into pole base
(FIGURE 1-B). Make sure Pole is tightly secured to main unit.
3.
To adjust length of Extension Pole:
A) Rotate upper (thicker) section of Extension Pole in “UNLOCK” direction indicated on label to
unlock it (FIGURE 1-C).
B) Adjust upper section to desired length (FIGURE 1-D).
C) Rotate upper section of Extension Pole in “LOCK” direction indicated on label to lock it back
in place (FIGURE 1-E).
NOTE: Increasing length of Extension Pole may provide additional leverage for easier,
more effective steam mopping.
Assembling Your
3-in-1 Steam Mop
A
B
THREADED
CONNECTOR
UPPER SECTION
POLE
BASE
D
E
C
FIGURE 1
6 | ENGLISH
