Continued on Next Page
SB-VW-CC/10W3v3 INSTR_SKU# 011333
Page 4 • JL Audio, Inc., 2012
S T E P 2 3
Using the four pilot holes on the Template as a guide, drill
through the rear deck using a 1/8” drill bit.
S T E P 2 7
Drill a pilot hole near the corner of each of the marked
openings large enough to accomodate the saw blade in the
next step.
S T E P 2 2
Align the template with one of the recesses in the rear deck,
and trace the four openings onto the panel as shown.
S T E P 2 6
Cut away the padding from the underside of the rear deck as
shown. Repeat
Steps 22-26
for the opposite side.
S T E P 2 1
Unclip the screw covers on the rear deck, and remove the
screws and hooks. Remove the rear deck.
S T E P 2 5
Turn over the rear deck, reposition the Template as shown,
and trace the outer perimeter of the Template.
S T E P 2 0
Carefully unclip the driver’s side C-pillar panel. Repeat for the
passenger side.
S T E P 2 4
Pictured is the rear deck with the openings marked.
