15
Q-Logic™ Joystick Setup
15.0
Joystick Throw
The throw is the place where the joystick is stopped in a particular
direction. Throw distance is the maximum distance/angle the shaft can be
moved in a particular direction. The throw should be set to the maximum
distance/force the individual utilizing it is capable of.
1. Once power cycle from
Section 15.
7 is complete, follow
Section 15.1
steps 1 and 2.
2. Select
Throw
option with navigation’s
Up & Down
buttons, then press the
Right
button.
3. This setting will turn power chair’s system to
IDLE MODE
, press
OK
if prompted
.
Then follow screen instructions.
4. Angle shaft with individual’s maximum force. Adjust the parameters by pressing the
Plus
or
Minus
buttons. ±
5. When it is all done you will be prompted to save the new configuration. Press
Yes
to save.
Q-Logic 3
15.2
Joystick Setup
1.
Plug the Q-Logic handheld programmer into the back of the display.
2.
On the programmer, select
Program Adjustments.
3.
In the Program Adjustments menu, select
Enhanced Display
.
4.
In the Enhanced Display folder,
select
Input Configuration.
5.
With the Plus and Minus buttons ±, select
Proportional.
6.
Use the
Left
navigation button to return to the Main Menu and save.
Содержание IDM-ALLROUND-9
Страница 51: ...a Notes 25 0...
