Stealth IDM-ALLROUND-9, Руководство пользователя

Страница: 22 / 52

12
Q-Logic™ Joystick Setup 15.0
Q-Logic 2 15.1
Joystick Setup
Center Deadband
Axis Deadband
The Axis Deadband parameter defines how far the joystick has to move to be
recognized. This can be helpful, if a toggle command has to be made.

Select m: Axis Deadband option with the navigation’s Up & Down buttons, then
press the Right button.

Use the Plus & Minus ± buttons to adjust the Axis Deadband. Adjustment ranges
from 5 to 50%. Press Left navigation button to save.
1. Plug in the Q-Logic™ Handheld Programmer to the Q-Logic™ ED (Enhanced Display)
or to the standalone joystick if SCIM (Specialty Control Input Module - Figure 1)
is in use.
2. On the Q-Logic™ Programmer, navigate to Program Adjustments Specialty Control
Proportional Joystick Set Ups Proportional . Here you can fine tune joystick
performance and functionalities such as:

Center and Axis Deadband

Tremor Suppression

Assign Direction

Joystick Calibration and Throw

Switch Operation
The Center Deadband parameter defines how far the joystick must be moved from
neutral position to engage moving the power chair. The value corresponds to the
diameter of a circle around the joystick center position. No drive or menu instruction will
be executed unless the joystick is moved out of this circle.

Select m: Center Deadband option with the navigation’s Up & Down buttons, then
press the Right button.

Use the Plus & Minus ± buttons to adjust the Center Deadband . Adjustment ranges
from 5 to 50%. Press Left navigation button to save.