HANDGUN HANGER SAFE
SECURITY CABLE INSTRUCTIONS
Power Cable Installation
STEP 1:
Wrap cable around a secure object and
insert lock through the loop on the other end of
the cable.
To install power cable,
simply insert cord into
the power cable hole
and plug into an outlet.
STEP 2:
Make sure bolt is in unlocked position.
Insert locking bolt into hole located at the rear of
the safe.
STEP 3:
Twist key to the RIGHT (clockwise)
to lock cable in place. Remove key.
Your security cable is now installed.
*To unhook cable, insert key and twist to
the LEFT (counter-clockwise). Remove lock.
Security
Cable Hole
Power
Cable Hole
STEP 1
Unlocked
Key will only release while locked.
Locked
STEP 2
STEP 3
