Stealth 3330881, Руководство оператора

Страница: 9 / 15

9
OPERATING INSTRUCTIONS
Fig J
2
Fig K
1
OFF
ON
Fig L
1
3
2
Before each start-up
1.Set the ON/OFF switch (1) to the OFF position (Fig H).
2.Turn the air pressure regulator knob (1) counter-clockwise until it stops (Fig I).
3.Attach hose and accessories (Fig J).(Hose and accessories need to be purchased
How to start
How to shut down
Moving the Air Compressor
separately.)
5.
Close the tank drain valve (Fig K).
Plug-in the power cord (2) (Fig K).
Set the ON/OFF switch to the ON position and allow the tank pressure
to build. Motor will stop when tank pressure reaches cut-out pressure.
Turn the air pressure regulator knob clockwise until desired pressure is
reached.
The compressor is ready for use.
Set the ON/OFF switch (1) to the OFF position.
Unplug the power cord (2).
Reduce the pressure in the tank through the outlet hose. Pulling the
safety valve ring (3) and keeping it open will also reduce the pressure in
the tank (Fig L).
Set the tank drain valve (1) to ON to ensire tank is drained (Fig K).
2.
3.
4.
1.
4.
3.
2.
1.
Fig H
OFF
1
Fig I
1
CAUTION:To avoid personal injury, DO NOT grab only the sliding
handle (1) to lift the whole unit. If you want to lift the unit, please make
sure you grab both the tank and sliding handle (1). Use the following
instructions to use the sliding handle (1) and wheels to move the unit
(Fig M).
a.Unlock the two cam locks (2) as shown in the illustration.
b.Slide the handle (1) upward to the desired height.
c. Lock the two cam locks (2) in place.
Lock
Unlock
1
2
Fig M