4
Installation Instructions
Power Supply
The i-Connect version of
Fiber Optics
(IC12F-1 and IC24F-1) will require an
appropriate version of the i-Connect power source. For more information,
see the ICPS user manual (Available at
https://stlpro.site/stealth-docs
,
search: ICPS)
The i-Drive compatible version (IDH503 & IDHF510-1) will be powered by
the i-Drive.
Fiber Optic Cables
Cutting
1.
Insert the fiber cable into an appropriate fiber cutting hole.
2.
Press down on the blade with a single stroke to cut the fiber cable.
a.
A clean cut is necessary to ensure proper function of the amplifier.
Fiber Attachment Adjustment
The attachment of the end of the fiber cable must be properly adjusted to
ensure proper function. Repetitive removal of the fiber cable from the
amplifier may require readjustment of the attachment.
1.
Loosen the fiber attachment by twisting the top portion only.
a.
It is not necessary to remove the top portion; it only needs to be
loose.
2.
Slide the fiber cable in or out until the fiber extends approximately .5mm
(1/64 in.) past the tip.
Approx. 0.5mm
Insertion Direction
Note:
Insert the fiber in the direction indicated by the arrow.
NOTICE
Trimming excess cable may help prevent
accidental damage to the fiber optic cable.
