1
Design & Function
Safety Precautions
•
The switch boxes are intended to be fitted on any power wheelchair with DB9
connection.
•
Incorrect use or installation may lead to risk of injury to the user and damage
to the wheelchair or other property.
•
In order to reduce these risks, you should carefully read this manual, paying
attention to the safety instructions and warnings.
•
Any unauthorized use of the product may lead to increased risk of accident.
Carefully follow the recommendations in this manual in order to prevent
accidents from use.
•
The switch boxes are non-serviceable parts.
•
Always contact your dealer or service technician for questions concerning the
operation or adjustment of the i-Connect Switch Boxes.
WARNING
During install, it is recommended that the device
is installed so that the mono jack ports are not facing up
to prevent ingress of water.
WARNING
Be sure the i-Connect is in a place where it will not be crushed
or damaged by operation of the wheelchair.
WARNING
Ensure that mono-jacks are correctly inserted
and all directions work as intended.
Be sure that the user understand what each control does.
WARNING
Ensure that all wires are routed in a way which prevents them
from being crushed, pinched, stretched, or sliced. Watch for
wear and tear. Damaged wires can make the box inoperable.
CAUTION
Ensure the coupling nuts on the D-sub are not lost
on the female side or you will be unable to
permanently affix the D-sub male and female.
