11
Installation Instructions
MK6i
Plug the female 9-pin into the digital input on the Sip 'N Puff with digital interface.
If using the 6 Switch Box, plug the power mono jack into the Remote On/Off port
(Port A) on the MK6i Display or Joystick.
1.
Plug the MK6i hand held programmer (HHP) into the chair.
2.
Turn on the chair.
3.
Turn on the MK6i hand held programmer (HHP).
4.
Select
Performance Adjust
.
5.
In the
Performance Adjust
menu, scroll to
Input Type
:
- Set this to
Digital
for each drive profile.
6.
Use the
Save
key to save the changes.
•
Return to the
Home
screen.
•
Select
Performance Adjust.
•
Scroll down to
RIM Control
.
- Set the desired drive profiles to On.
•
Use the
Save
key to save the changes.
NOTICE
If not using a switch for reverse, enable RIM Control to allow
for reverse driving using the following steps.
