Stealth Products GAT400 Series Скачать руководство пользователя страница 9

  Warranty 

7.0 

Our  products  are  designed,  manufactured,  and  produced  to  the  highest  of 
standards. If any defect in  material or workmanship is found, Stealth  Products 
will  repair  or  replace  the  product  at  our  discretion.  Any  implied  warranty, 
including the implied warranties of  merchantability and fitness for a particular 
purpose,  shall  not  extend  beyond  the  duration  of  this  warranty.  Stealth 
Products, LLC does not warrant damage due to, but not limited to: 

Misuse, abuse, or misapplication of products.

Modification of product without written approval from Stealth Products, LLC.

Any alteration or lack of serial number, where applicable, will automatically void
this warranty.

Stealth Products, LLC is liable for replacement parts only.

Stealth Products, LLC is not liable for any incurred labor costs.

No  person is  authorized to  alter, extend, or waive  the  warranties of Stealth 
Products, LLC. 

Stealth Products warrants  against  failure  due  to defective  materials 
or workmanship: 

Covers: 

2 years

Hardware: 5 years 

Electronics: 3 years 

In Case of Product Failure 

7.1 

In  the  event  of  product  failure  covered  by  our  warranty,  please  follow  the 
procedures outlined below: 

1.

Call Stealth at +1 (512) 715-9995 or toll free +1-800-965-9229.

2.

Request the Returns Department or obtain an RA from the Returns Department and follow
department or documentation instructions.

Содержание GAT400 Series













Отзывы: