Stealth Products GAT400 Series, Руководство по установке

Страница: 6 / 12

2
Installation Instructions 5.0
CAUTION
DO NOT OVER TIGHTEN SCREWS. This could cause wearing of screws
or joystick threads, causing the client to lose efficient control.
Installing Joystick 5.1
Step 1. Remove bar plug (C2) from Gatlin arm (C1). Loosen clamping screw (1). Slide block (A) into
the arm(C1).
Step 2. Adjust horizontal position where desired. Replace bar plug (C2). Hold 25mm screw (1) and
position Multi Joystick (B) in place.
Step 3. Tighten the screw (1) with 4mm Allen Wrench (Hex Key), but do not over tighten. Mount
clamp (A) and tighten to Multi Joystick (B).