Stealth Cam STC-U840IR, Инструкция по эксплуатации

Страница: 19 / 36

WWW.STEALTHCAM.NET
Toll Free 877-269-8490
19
Setting the Time Out Mode:
Your Stealth Cam can be programmed to set the amount of time in
minutes the camera will sleep between PIR triggers.
•
Switch the camera to the ON position.
Ø
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
Press [UP] button FOUR times to enter Time Out setting mode.
•
The word TIME OUT will be blinking.
•
Press [OK] button and the time out time will now blink.
•
Press [UP] or [DN] button to increase or decrease the time value
in minutes from 1 to 59 minutes in 1 minute increments.
•
Press [OK] to save your selection.
•
Press [MENU] button to exit.
Setting the IR emitter selection:
This camera is equipped with an IR selection toggle switch. Make sure
camera is in the OFF position before making any changes.
•
(A) 38 IR – Full illumination. Ideal for subject matter beyond 20ft.
•
(B) 30 IR – Reduced illumination. Good for use when subject is
20ft or closer.