Stealth Cam STC-U840IR, Инструкция по эксплуатации

Страница: 15 / 36

WWW.STEALTHCAM.NET
Toll Free 877-269-8490
15
Programming the Stealth Cam
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode. If MENU button is not pressed within 30
seconds, camera will automatically enter PIR detection mode.
NOTE: At the end of each program set up selection, you may press
the MENU button to exit and return to camera status ready screen.
Setting the Still image Resolution:
Your Stealth Cam can be programmed to 3 different resolutions,
High (3 Stars-­‐8Mp), Low (2 Stars–3Mp), Base (1 Star–1.3Mp).
•
Switch the camera to the ON position.
Ø LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word CAMERA and the STARS will be blinking.
•
Press the [OK] button ONCE to choose the selection.
•
Press the [UP] or [DN] button to select the desired resolution.
•
Press [OK] to save your selection.
•
Press [MENU] button to exit.