Stealth Cam G34MAX, Инструкция по эксплуатации

Страница: 13 / 44

PIR VIDEO: In this mode the camera will take a video when trigger is activated.
PIR DELAY: This setting is used to determine how long the
camera will wait before reinitializing PIR sensor after taking
a video.
OPTIONS: 00m 01s – 59m 59s
❖
PIR RANGE: This setting will change the sensitivity of the
PIR sensor on the camera. Distances will vary based on
environment.
OPTIONS:
STANDARD: No change to sensor sensitivity
EXTENDED: Will trigger ~33% further than STANDARD
NEAR FIELD: Will only trigger on movement very
close to camera
❖
PIR AUTO ADJUST: When this setting is ON, the camera will
automatically adjust the PIR sensitivity to keep the PIR
range consistent at different temperatures.
OPTIONS: ON | OFF
❖
VIDEO RES: This setting will determine the resolution of
recorded video. A higher resolution will result in better
videos and take more memory space.
OPTIONS: 1280 x 720 | 1920 x 1080
❖
VIDEO LENGTH: This setting is used to determine the
length of time, in seconds, of a video recording.
OPTIONS:
10 sec
– 180 sec (increments of 5 sec)
MAV: This setting will continuously record video until
PIR Sensor is no longer activated
NOTE: While camera is in night time mode, video length
maximum is 30 seconds.
❖
VIDEO AUDIO: This setting is used to determine if the
camera should record audio (sound) with its video
recording. Recording audio will take additional space on
memory card.
OPTIONS: ON | OFF
❖
IR BRIGHTNESS CONTROL: This setting is used to adjust
the brightness of the IR LEDS.
OPTIONS:
FULL: Default Setting
HALF: Half as bright as FULL. Ideal for close-up shots
Page 13