Stealth Cam FX SERIES, Инструкция по эксплуатации

Страница: 14 / 36

www.stealthcam.com Page
877-­‐269-­‐8490
14
BATTERY REMOVAL & INSTALLATION
To remove the batteries; open the
battery door to access
and
remove the
batte
ries
.
New, Alkaline or Lithium, ‘AA’ batteries must be inserted with the orientation as shown in
the compartment. As with most electronic devices the negative (
-
) orientation of the
batteries should be against the springs. Failure to insert the batteries properly will cause
damage to the unit.
Once batteries are properly installed and with the orientation correct, simply
close
the
battery compartment door back into its final locked position. Should the battery
door not willingly
latch
into it destination, remove the
batteries
and examine the area
of possible debris that may be causing the issue.
NOTE: Replacing the batteries will not reset the cameras current configurations.
**WARNING**
Do not mix new and old batteries.
Remove batteries from the tray if the unit will not be in use for extended period of time .